Menampilkan postingan yang diurutkan menurut relevansi untuk kueri Engineering. Urutkan menurut tanggal Tampilkan semua postingan
, ,

Rabu, Maret 27, 2013
Oil Career Tripatra March 2013 company in the in energy sector, has been operating in Indonesia, we offered best solutions in energy industry, Currently we are looking for a professional to build a career with us. Applicants are invited for the following position:

PIPING - LEAD PIPING ENGINEER
Qualification & Experience:

  • Have experiences involving in engineering/design at least an oil & gas engineering /EPC projects either upstream or downstream or have experiences involving in Conceptual & Feasibility Study, Pre-FEED & FEED ( FEL-0,1,2,3 ) in oil & gas Offshore & Onshore engineering /Petrochemical
  • Min University degree majoring in Mechanical Engineering with min 6 years experience total with at least 4 years experience in design and engineering for oil & gas projects (upstream and downstream)
  • Have experience in the design and specification of pipelines including pipeline routing, sizing, isometric, materials selection, corrosion protection, installation and tie-in procedures, hazard analysis and environmental considerations
  • Have a proven ability to perform Piping equipment engineering include design, study and calculation in Piping System with a high level of quality
  • Have an excellent knowledge of current internationally recognized Codes and Standards
  • Have ability in quality management and schedule, manpower planning and man-hour control of the Piping engineering work
  • Able to perform Procurement support

PIPING - LEAD PIPING STRESS ENGINEER
Qualification & Experience:
  • Have experience in the critical line list, calculation , specification and piping stress report
  • Have a proven ability to perform Piping equipment engineering include design, study and calculation in Piping System with a high level of quality
  • Min University degree majoring in Mechanical Engineering with min 5 years experience total with at least 3 years experience in design and engineering for oil & gas projects (upstream and downstream)
  • Have an excellent knowledge of current internationally recognized Codes and Standards
  • Have ability in quality management and schedule, manpower planning and man-hour control of the Piping engineering work
  • Able to perform interface and piping info

LEAD PIPING MATERIAL ENGINEER
Qualification & Experience:
  • Have experience in the wall thickness calculation, piping material class, data sheet, RFQ & TBA
  • Have a proven ability to perform MTO, material substitusion,
  • Min University degree majoring in Mechanical Engineering with min 5 years experience total with at least 3 years experience in design and engineering for oil & gas projects (upstream and downstream)
  • Have an excellent knowledge of current internationally recognized Codes and Standards
  • Have ability in quality management and schedule, manpower planning and man-hour control of the Piping engineering work
  • Able to perform interface, branch connection, P&ID review

STATIC - CIVIL PIPING ENGINEER
Qualification & Experience:
  • Have experiences in oil & gas engineering /EPC projects either upstream or downstream
  • Have experiences in the engineering and design
  • Have a good knowledge of current internationally recognized Codes and Standards
  • Min University degree majoring in Chemical Engineering with min 3 years experience in design and engineering for oil & gas projects (upstream and downstream)
  • Have an ability to perform engineering study, design and calculation under minimum guidance
  • Able to perform Procurement support

CIVIL FRESH ENGINEER
Qualification & Experience:
  • Min University degree majoring in civil engineering
  • Able to use and operate major engineering software
  • Have good proficiency in using computer and office applications
  • Have good proficiency in hand calculation
  • Have intermediate written and spoken in English

ELECTRICAL SR. ENGINEER
Qualification & Experience:
  • Graduate / Degree in Mechanical Engineering from any reputed institution / University , securing 1st class or 1st division or CGPA above 75%.
  • Have a wide range of experience in the Electrical engineering
  • Able to analyze (ETAP Software Program) Lightning Study and Lighting Study.
  • Have experience to developed Electrical design basis, conceptual design of the facilities and standard drawings and controlled all the Electrical design activities through the project execution.
  • Have an excellent knowledge of current internationally recognized Codes and Standards
  • Have a proven ability to perform Electrical engineering include study, calculation in Electrical System with a high level of quality
  • Able to perform Procurement support
  • Have experiences involving in engineering/design at least an oil & gas engineering /EPC projects either upstream or downstream or have experiences involving in Conceptual & Feasibility Study, Pre-FEED & FEED ( FEL-0,1,2,3 ) in oil & gas Offshore & Onshore engineering /Petrochemical

STATIC SR. ENGINEER
Qualification & Experience:
  • Min University degree majoring in Mechanical Engineering with min 5 years experience total with at least 2 years experience in design and engineering for oil & gas projects (upstream and downstream)
  • Brief Qualification:
  • Have a proven ability to perform Mechanical static equipment and system engineering include study, calculation in Mechanical System with a high level of quality
  • Have an excellent knowledge of current internationally recognized Codes and Standard
  • Able to perform Procurement support
  • Have experiences involving in engineering/design at least an oil & gas engineering /EPC projects either upstream or downstream or have experiences involving in Conceptual & Feasibility Study, Pre-FEED & FEED ( FEL-0,1,2,3 ) in oil & gas Offshore & Onshore engineering /Petrochemical

CIVIL SR. ENGINEER
Qualification & Experience:
  • Min University degree majoring in Civil Engineering with min 5 years experience total with at least 2 years experience in design and engineering for oil & gas projects (upstream and downstream
  • Have a wide range of experience in the civil and structural engineering design including underground facility ,concrete structure design, steel structure design, and foundations for large or heavy equipment and 3D design are applied for all the civil structures
  • Have experience to developed civil design basis, conceptual design of underground facilities and standard drawings and control all the civil design activities through the project execution
  • Have an excellent knowledge of current internationally recognized Codes and Standards
  • Able to perform Procurement support
  • Have experiences involving in engineering/design at least an oil & gas engineering /EPC projects either upstream or downstream or have experiences involving in Conceptual & Feasibility Study, Pre-FEED & FEED ( FEL-0,1,2,3 ) in oil & gas Offshore & Onshore engineering /Petrochemical

If you think that you are really the right person to fill this challenging position, please send your application, CV and recent photograph to: recruitment@tripatra.com  cc : budi.sinaga@tripatra.com  max 500 KB please quote applied POSITION TITLE in the "subject" line . Or

TRIPATRA
Gedung Tripatra
Jl. R.A. Kartini No. 34 Cilandak Barat
Jakarta Selatan 12430
Write the position title on top – left corner of the envelope
www.tripatra.com
Oil Career Tripatra March 2013 DEADLINE 10 April 2013.

Selasa, Desember 17, 2013




We are RPE GROUP also known as RPE-Engineering, is an EPCI and MPS (Man Power Supply) Companies for oil and gas industry immediately looking for several positions:

1. Senior Engineer
• Sr. Piping Engineer
• Sr. Electrical Engineer
• Sr. Instrument Engineer
• Sr. Process Engineer
• Sr. Civil Structure Engineer
• Sr. Mechanical Engineer

Requirement:
a. Have a bachelor degree in engineering from reputable university in related major
◦ For Mechanical/Piping: Min. Bachelor degree in Mechanical Engineering
◦ For Electrical : Min. Bachelor degree in Electrical Engineering
◦ For Process : Min. Bachelor degree in Chemical Engineering
◦ For Instrument: Min. Bachelor degree in Physics or Electricity Engineering
◦ For Civil/ Structural : Min. Bachelor degree in Civil or Ocean Engineering

b. Minimum 8 years experiences in detail design engineer (FEED) in oil and gas industry
c. Experience in handling min. 2 large scale of EPCI Project onshore and offshore
d. Good understanding in related engineering philosophy
e. Good command in English
f. Good computer literacy and other proficient related software

2. Engineer
• Process Engineer
• Mechanical Engineer
• Piping Engineer
• Electrical Engineer
• Civil/Structure Engineer
• Instrument Engineer
• Electrical Engineer

Requirement:
• Have a bachelor degree in engineering from reputable university in related major
◦ For Process : Min. Bachelor degree in Chemical Engineering
◦ For Mechanical: Min. Bachelor degree in Mechanical Engineering
◦ For Piping : min. Bachelor Degree in Mechanical/ Material/ Aerospace Engineering
◦ For Electrical : Min. Bachelor degree in Electrical (Power) Engineering
◦ For Instrument: Min. Bachelor degree in Physics or Electricity Engineering
◦ For Civil/ Structural : Min. Bachelor degree in Civil or Ocean Engineering
• Min. 3 years experience in upstream engineering and detail design/FEED of oil & gas
• Experience in develop or analyze datasheet, specification & Procedure
• Good in performing simulation oil & gas plant
• Experience in estimate cost & MTO, etc.
• Good understanding in related engineering philosophy
• Familiar with related standard and codes
• Good command in English
• Good computer literacy and other proficient related software e.g HYSIS, Pipesim, etc.

3. Jr. Engineer
• Jr. Process Engineer
• Jr. Mechanical Engineer
• Jr. Piping Engineer
• Jr. Electrical Engineer
• Jr. Civil/Structure Engineer
• Jr. Instrument Engineer
• Jr. Electrical Engineer

Requirement:
• Have a bachelor degree in engineering from reputable university in related major
◦ For Process : Min. Bachelor degree in Chemical Engineering
◦ For Mechanical: Min. Bachelor degree in Mechanical Engineering
◦ For Piping : min. Bachelor Degree in Mechanical/ Material/ Aerospace Engineering
◦ For Electrical : Min. Bachelor degree in Electrical (Power) Engineering
◦ For Instrument: Min. Bachelor degree in Physics or Electricity Engineering
◦ For Civil/ Structural : Min. Bachelor degree in Civil or Ocean Engineering

• Min. 3 years experience in upstream engineering and detail design/FEED of oil & gas
• Experience in develop or analyze datasheet, specification & Procedure

4. Drafter
• Process Drafter
• Electrical Drafter
• Civil Drafter
• Structure Drafter

Requirement:
• Min. High school from Drafting school
• Have similiar experience min. 2 years in oil& gas company is a must
• Able to operate related software (e.g PDMS, 3D autocad, P&ID,internet, Ms.Office, etc)
• Can join us immediately

5. Sr. Proposal & Bid Estimator Engineer

Responsibilities:
• Preparing Technical Proposal with Operation Dept (e.g. Project Execution and Quality Plan)
• Liaise with internal departments (QHSE, Engineering, Finance &Accounting, Procurement) regarding tender requirements that must be fulfilled by internal departments and compile them into a proposal package that met these tender requirements within the agreed deadlines
• Assisting with coordination of all pre-award correspondence with the client
• Assisting with tender pre-qualification submissions
• Updating the Proposals Leader/Tender Manager on a regular basis about progress and areas of difficulty
• Providing input for the estimating process and reviewing output
• Assisting in the coordination of full handover to the Project Manager after award

Requirement:
• Bachelor degree in engineering
• Minimum 5 years experience as proposal & bid estimator engineer in oil & gas industry
• Good Command in English passive & active is a must
• Good interpersonal and communication skills
• Good computer literacy

6. Startup Commissioning/ Pre Commissioning Engineer

• Bachelor of science degree, preferably in an Electrical/ Mechanical discipline
• Min. 8 years experience in oil & gas industry including previous Topside experience
• Good command in English
• Good computer literacy and have experience in systems completion for a oil company

7. Field/ Construction Engineer
• Piping Field Engineer
• Instrument Field Engineer
• Civil Field Engineer

Requirement:
• Candidate must possess at least a Bachelor s Degree in
◦ For Piping Field Engineer : in Mechanical Engineering
◦ For Instrument Field Engineer : in Physics or Electricity Engineering
◦ For Civil Field Engineer: Civil Structure Engineering

• Min. 5 years in construction of oil-gas facilities with experience in min. 2 construction projects
• Understand standard engineering specifications, Oil & Gas process codes and applicable international codes
• Demonstrate knowledge of various engineering discipline
• Familiar with HSE policy and procedures
• Strong leadership skill
• Good Command in English passive & active is a must
• Good interpersonal and communication skills
• Familiar with reporting system

8. Procurement Engineer

• Hold Bachelor Degrees from Economics / Engineering
• Experience min. 5 years in Oil & Gas/ contractor Company as Procurement/Purchasing
• Understand about supply chain management
• Have good understanding on PTK 007 and other regulation related to Oil & Gas industry
• Have good negotiation and communication skills
• Have knowledge and involved in tender submission will be preferred
• Able to join us immediately

9. Sr. Cost Control

• Minimum 8 years of broad experience in the same position in oil & gas industry
• Engineering Degree (S1), Preferable from Civil, Mechanical or Industrial Engineering
• Experience with project control software programs

10. Contract Specialist

• Bachelor degree in engineering
• At least 5 years experience as Contract Engineer at EPC Company
• Excellent written and verbal in English
• Computer literate: Microsoft Office, Microsoft Project, etc.
• Having good understanding in the fundamental of condition of commercial contracts.

Only candidates who meet the qualifications will be processed.

Please send your application (max. 200kb) with POSITION ON THE SUBJECT EMAIL to: hrd@rpe-engineering.com before 30 December 2011

, , ,

Selasa, Februari 04, 2014
Lowongan Kerja Info-loker-kota Astra Honda Motor
Lowongan Kerja PT Astra Honda Motor, PT AHM or Astra Honda Motor is a prominent automotive company, running business in sole agent (ATPM) of Honda Motorcycle in Indonesia. Originally registered as PT Federal Motor in 1971. PT Astra Honda Motor was established in 2001 as a merger results of PT Federal Motor with its subsidiaries. At present, PT Astra Honda Motor is 50% owned by a diversified conglomerate PT Astra International Tbk and 50% by a Japanese Company Honda Motor Company Ltd. PT AHM is based in Jakarta and has 3 production facilities (Sunter, Pegangsaan Kelapa Gading, and Cikarang)

PT Astra Honda Motor through Lowongan Kerja 2014 seeking the candidates who are interested to learn and gaining hands-on experience in automotive industry as follow:

Treasury (Finance)

Requirements
• Have passed / final semester S1 ACCOUNTING with GPA 3.00
• Max age 27 years
• Diligent and conscientious

Engineering Analyst

Requirements
• Have passed / final semester S1 MECHANICAL ENGINEERING with GPA 3.00
• Max age 27 years
• Have a good analytical and logical skills
• Able to explain the process of manufacturing

Financial Planning & Analysis

Requirements
• Have passed / final semester S1/S2 majoring in Accounting / Financial Management / IESP with GPA 3.00
• Max age 27 years
• Understanding financial statements
• Understand and be able to analyze the condition of the macro / micro economics

Cost Planning

Requirements
• Have passed / final semester S1 Mechanical Engineering / Industrial Engineering with GPA 3.00
• Max age 27 years
• Able to explain the process of manufacturing parts
• Knowing about the concept of the calculation of production costs

EHS P3A Officer & EHS Analyst (GA)

Requirements
• Have passed / final semester S1 major in Electrical Engineering (strong currents) / Chemical Engineering  with GPA 3.00
• Max age 27 years
• Diligent and conscientious
• Like working in the field

OBM Section Head (GA)

Requirements
• Have passed / final semester S1 Civil Engineering with GPA 3.00
• Max age 27 years
• Like working in the field
• Have a good logic analyzer and
• Communicative and good interpersonal skills

General Support Section Head (GA)

Requirements
• Have passed / final semester S1 Architectural Engineering / Civil Engineering / Electrical Engineering wiht GPA 3.00
• Max age 27 years
• Adaptable
• Have a good communication skill

Technical Service

Requirements
• Have passed / final semester S1 Mechanical Engineering with GPA 3.00
• Max age 27 years
• Familiar with MS Office and Auto Cad
• Have a good communication and problem solving skills

Warehouse & Quality Supervisor (Logistic)

Requirements
• Have passed / final semester S1 majoring in Industrial Engineering  with GPA 3.00
• Max age 27 years
• Have a good communication skill

Technical Service

Requirements
• Have passed / final semester majors D3 Mechanical Engineering / Automotive Engineering with GPA 3.00
• Max age 25 years
• Diligent and conscientious
• Mastering motorcycles analysis / trouble shooting
• Familiar with graphic design applications (Corel Draw, Illustrator, Photoshop)

Product Technician

Requirements
• Have passed / final semester D3 Electronics Engineering with GPA 3.00
• Max age 25 years
• Ability to work and think systematically

EHS Controller (GA)

Requirements
• Have passed / final semester D3 majoring in electrical engineering (strong currents) with GPA 3.00
• Max age 25 years
• Tenacious and meticulous
• Have high initiative

EPP & QCO Analyst (Plant 2)

Requirements
• Have passed / final semester D3 Mechanical Engineering / Mechatronics with GPA 3.00
• Max age 25 years
• Understanding good analytical thinking
• Assertive and have good control capability

Engineer Controller

Reduirements
• Have passed / final semester D3 Mechanical Engineering with GPA 3.00
• Max age 25 years
• Assertive and have good control capability

Information Technology (IT)

Requirements
• Have passed / final semster D3 Informatics Engineering / Enformatics Management with GPA 3.00
• Max age 25 years
• Assertive and have good control capability
• Have an understanding of programming and data base

EPP & QCO (PLANT 1)

Requirements
• Have passed / final semester D3 Mechanical Engineering with GPA 3.00
• Max age 25 years
• Understanding the production process and quality standards

Supplier Controller

Requirements
• Have passed / final semester D3 Mechanical Engineering / Automotive Engineering with GPA 3.00
• Max age 25 years
• Understanding the production process and quality standards

Guest Relation Officer

Requirements
• Have passed / final semester S1 Communication Science / FISIP with GPA 3.00
• Max age 27 years
• Have good communication skills
• Ready to work overtime and outside assignments

Channel Infrastructure Supervisor

Requirements
• Have passed / final semester S1 Civil Engineering with GPA 3.00
• Max age 27 years
• Have a good analytical skills and creativity
• Have a good knowledge of 3D Max, Autocad & Photoshop

Marketing Planning & Analysis

Requirements
• Have passed / final semester S1 Industrial Engineering / Mechanical Engineering / Statistics / Economics / Psychology / DKV / Communication Science / Management with GPA 3.00
• Max age 27 years
• Fluent in English
• Interested in the world of advertising and promotion

Area Sales Supervisor

Requirements
• Have passed / final semester S1 all major with GPA 3.00
• Max age 27 years
• Fluent in English
• Interest in the field of marketing
• Able to work under pressure and work hard

Customer Insight Analyst (H3C)

Requirements
• Have passed / final semester S1 Communication Sciense / Social / Psychological Statistics / Mathematics with GPA 3.00
• Max age 27 years
• Have a good analysis and logical thinking
• Have good communication skills

Product Quality Analyst

Requirements
• Have passed / final semester S1 Mechanical Engineering with GPA 3.00
• Max age 27 years
• Fluent in English
• Familiar with MS Office

Market Quality

Requirements
• Have passed / final semester S1 Electronics Engineering (weak current) with GPA 3.00
• GPA 3.00 max age 27 years
• Have a good analysis and logical thinking

Part Sales Analyst

Requirements
• Have passed / final semester S1 Mechanical Engineering / Industrial Engineering / Management with GPA 3.00
• Max age 27 years
• Have a good analysis and logical thinking

EPP Coordinator

Requirements
• Have passed / final semester S1 Mechanical Engineering / Industrial Engineering / Materials & Metallurgy Engineering / Electrical Engineering with GPA 3.00
• Max age 27 years
• Have a good analysis and logical thinking

Please send your application and complete CV with recent photograph and kindly mark code of the position applied at the email subject to:


Lowongan Kerja Astra Honda Motor Februari 2014

PT Astra Honda Motor
Email : RECRUITMENT@ASTRA-HONDA.COM
Please write down the position on your email subject
Published Date : 03 Februari 2014
Closed Date : 07 Februari 2014
Only qualified candidate match with the above mentioned qualifications will be notified for further selection
, , , , ,

Jumat, Februari 07, 2014
Lowongan Kerja Info-loker-kota Yamaha Indonesia Motor Manufacturing
Lowongan Kerja PT Yamaha Indonesia Motor Manufacturing, YIMM is a leading automotive company in Indonesia with main business in manufactures and markets of Yamaha motorcycles in Indonesia. PT Yamaha Indonesia Motor Manufacturing is a member of Japan's leading automotive giant Yamaha Motor Co. Ltd. YIMM domiciled in East Jakarta and supported by 2 production plants with installed production capacity of 3 million units per year. Yamaha's production plants are situated in Pulogadung East Jakarta and Karawang West Java. During 9 month of 2013, YIMM reached significant performance. According to YIMM news release in 18 October 2013 as cited by JobsCDC.com, YIMM was able to expand sales by 41.37% from 153,440 units in August 2013 to 216,919 units in September 2013.

PT Yamaha Indonesia Motor Manufacturing through Lowongan Kerja 2014 invites the best candidates to join as following positions below:

Cost Plan (Code : COST)
S1 Mechanical Engineering, Industrial Engineering

Technical Manual Publication (Code : TECH)
S1 Mechanical Engineering

R&D Staff (Code : R&D)
• S1 Mechanical Engineering, Metallurgical Engineering, Industrial Engineering
• D3 Mechanical Engineering

Technical Service (Code : SERV)
S1 Mechanical Engineering,

Area Service Development (Code : ASD)
S1 Mechanical Engineering

Quality Assurance (Code : QA)
S1 Mechanical Engineering, Metallurgical Engineering, Industrial Engineering

Purchase Staff (Code : PURC)
S1 Industrial Engineering

Project Control (Code : PRJ)
S1 Industrial Engineering

Production Control (Code : PC)
S1 Industrial Engineering

Business Plan (Code : BP)
S1 Industrial Engineering

Warehouse (Code : WHS)
S1 Industrial Engineering

Material Handling Equipment (Code : MHE)
S1 Industrial Engineering

Production Engineering Staff (Code : PE)
S1 Metallurgical Engineering

QHSE Staff (Code : QHSE)
S1 Chemical Engineering / Environmental Engineering, Industrial Engineering

Marketing Business Development (Code : MKT)
S1 Management, Industrial Engineering

Network Quality (Code : NET)
S1 Management

IT (Code : IT)
S1 Informatics Engineering / Information Systems

Marketing Analyst (Code : MA)
S1 Mathematics / Statistics

Product Plan & Coloring (Code : PPC)
S1 Design Product / DKV / Design

Promotion (Code : PRM)
S1 Communication, Design Product / DKV / Design

Legal Staff (Code : LGL)
S1 Law

Accounting Staff (Code : ACC)
• S1 Accounting / Taxation
• D3 Accounting / Administration or related

Finance Treasury Staff (Code : FIN)
S1 Accounting / Taxation

Administrasi (Code : ADM)
• S1 Accounting / Taxation, Administration or related
• D3 Accounting / Administration or related

Supervisor Tax (Code : SPV-TAX)
• S1 Accounting / Taxation
• At least 2 years of experience as a tax supervisor at a manufacturing company or as senior II at tax consultant

General Requirements:
• Maximum age 26 years old for Staff and 28 years for SPV, with a minimum GPA of 3:00
• Familiar with MS Office applications.(Ms.Word, Ms.Excel and Power Point)
• Fluent in English both in oral and written
• Able to work well independently or team
• Has never participated in the recruitment process at PT Yamaha Indonesia Motor Mfg
• Placements : Jakarta, Cibitung, Semarang, and Madiun

Please send your updated CV, recent photograph, other supporting documents along with Yamaha Application Form (please write position code on application form) to:

Kamis, Januari 10, 2013
PT Technip Indonesia
TECHNIP is a public listed company in France with over 50 years of worldwide experience and more than 28 years of engagement in the Asia Pacific region.
With a global workforce of 23,000 people in 48 countries, industrial assets in 5 continents and a fleet of 19 vessels (by end 2011), Technip is a world leader in the fields of project management, engineering and construction for the oil & gas industry, offering a comprehensive portfolio of innovative solutions and technologies. Technip is a key contributor to the development of sustainable solutions for the energy challenges of the 21st century.
Technip established a subsidiary in Indonesia: PT. Technip Indonesia (PTTI), which services the Indonesian Oil and Gas, Petrochemical and General Industrial sectors. PTTI covers offshore and onshore field development, gas processing and liquefaction, refining and onshore pipelines. In non-oil sectors, PTTI covers fertilizers, chemicals, cement, life sciences, power generation and other growth market industries.
As part of our business expansion in Indonesia, we are seeking highly qualified professionals who are seeking career development to fill in position below:
Mechanical Rotating Engineer
(DKI Jakarta)
Job Summary:
Perform Engineering design on current projects for onshore /offshore projects and to fulfill Departmental needs and support engineering operation within the Company.
Reporting Lines and Interactions:
Hierarchically reports to: Mechanical Department Head
Operationally reports to: Lead Mechanical Engineer
Responsibilities:
Main scopes of engineering deliverables performed include:
• Basic engineering design and calculation reports
• Equipment pre-selection reports (for Rotating Equipment)
• Technical Clarifications and Bid Evaluation Reports
• Estimate equipment cost /Weight estimation
• Interface with other disciplines
• Vendor Data Review/Approval / Review Manufacturer Data Report (MDR)
• Inspection assistance (which will include own Technical Analyses of test results)
• Solve site related issues / Support to Site Technical Queries (STQ)
Requirements:
• The Candidate shall posses a recognised Degree in Mechanical Engineering with good communication skill
• Possess at least minimum 5 years of design experience in various Rotating Equipment, including High Pressure Hydrocarbon Compressors and Turbo-Expanders (A minimum of 3 years of experience in EPC Contracting work will be an advantage, including adequate Site and Test-Witness experience)
• Be able to work independently and have the ability to Lead a team of Rotating Equipment and general Mechanical Engineers for oil & gas / petrochemical projects
• Be able to produce Engineering specifications /Requisitions/ perform Equipment selection for Client approval in fast-track environments and conduct technical clarification meetings with potential Bidders /Clients
• Be thorough with the standards and good engineering practices of international oil companies, in addition to international codes such as API, ASME/ANSI , NFPA, NACE, EN and ISO
• He must possess detailed knowledge of his field and able to perform technical audit / Pre-qualification meeting at Vendor s premises
• The Candidate having relevant experience 3 years and above can also apply
Mechanical Static Engineer
(DKI Jakarta)
Job Summary:
Perform Engineering design on current projects for onshore /offshore projects and to fulfill Departmental needs and support engineering operation within the Company.
Reporting Lines and Interactions:
Hierarchically reports to: Mechanical Department Head
Operationally reports to: Lead Mechanical Engineer
Responsibilities:
Main scopes of engineering deliverables performed include:
• Basic engineering design and calculation reports
• Equipment pre-selection reports (for Static Equipment – Pressure vessels, column, reactors, storage tanks, air-coolers, TEMA exchangers, plate-exchangers, etc)
• Technical Clarifications and Bid Evaluation Reports
• Equipment Cost estimation /Weight estimation
• Interface with other disciplines
• Vendor Data Review/Approval / Review Manufacturer Data Report (MDR)
• Inspection assistance (which will include own Technical Analyses of test results)
• Ability to solve site related issues / Support to Site Technical Queries (STQ)
Requirements:
• The Candidate shall posses a recognised Degree in Mechanical with good communication skill
• Possess at least minimum 5 years of design experience in various Static Equipment including Pressure Vessels, Air-coolers, Heat Exchangers, Fired-Heater, API-650 tanks for Onshore /Offshore application, (3 years experience in EPC Contracting work will be an advantage, including adequate Site and Test-Witness experience)
• Be able to work independently and have the ability to Lead a team of Static Equipment /Mechanical Engineers for oil & gas / petrochemical projects
• Be able to produce Engineering specifications /Requisitions/ perform Equipment selection for Client approval in fast-track environments and conduct technical clarification meetings with potential Bidders /Clients
• Be thorough with the standards and good engineering practices of international oil companies, in addition to international codes such as ASME/ANSI, PD 5500, API-650/620, NACE, EN and ISO
• He must possess detailed knowledge of his field and able to perform technical audit / Pre-qualification meeting at Vendor s premises
• The Candidate having relevant experience 3 years and above can also apply
Process Safety Engineer
(DKI Jakarta)
Requirements:
• Min. Bachelor Degree from reputable university majoring in Chemical Engineering
• Minimum of 3 years experience in Offshore / Onshore Oil and Gas Engineering / Operation, Design and Commissioning Support
• Should possess hands on experience in handling Process Engineering softwares like PIPENET, FLARESIM, etc.
• Should be able to perform fire water hydraulic calculations and develop process safety drawings like hazardous area classification with precise knowledge
• Should have analytical knowledge and report writing capabilities
• Should be familiar with international codes and standards applicable for Process Safety Engineering (NFPA, SOLAS, API, IP, etc.) in Oil and Gas industry
• Should have enough supervisory skill to manage a team of drafters
• Should be able to coordinate within the discipline and other disciplines
• Should be a fast learner and a team worker
Process Engineer
(DKI Jakarta)
Requirements:
• Must possess minimum Bachelor degree in Chemical Engineering from a recognized, fully accredited university in Indonesia
• Minimum of 3 – 5 years experience in Offshore / Onshore Oil and Gas Engineering, Design and Commissioning Support for Process Engineer
• Shall be able to check and verify the work of junior engineers and provide guidance as required
• Should possess hands on experience in handling Process Engineering software like HYSYS, PIPESIM etc.
• Should be able to perform process calculations and develop process drawings with precise knowledge
• Should have analytical knowledge and report writing capabilities
• Should be familiar with international codes and standards applicable for Process Engineering in Oil and Gas industry
• Should have enough supervisory skill to manage a team of engineers and drafters
• Should be able to co-ordinate with other disciplines and the client as an effective team worker
• Be willing to travel and stationed at various operating centre on needs basis for short-term assignment
Main Accountabilities:
Main scope of Engineering deliverables performed include:
• Basic engineering design and calculation reports
• Technical Clarifications and Bid Evaluation Reports
• Equipment Cost estimation /Weight estimation
• Interface with other disciplines
• Vendor Data Review/Approval / Review Manufacturer Data Report (MDR)
• Inspection assistance (which will include own Technical Analyses of test results)
• Ability to solve site related issues / Support to Site Technical Queries (STQ)
Structural Engineer
(DKI Jakarta)
Requirements:
• Possess recognized degree in Civil or Ocean Engineering
• 3 – 5 years experience and above as Senior Structural Engineer in Structural analysis and design in Oil and Gas industry for offshore platforms
• Experienced using SACS software for design of offshore structures
• Should possess good communication skills in English language
• Should hold Indonesian citizenship and ready to be placed in Jakarta or Balikpapan
Instrument Engineer
Job Summary:
Provide technical and project execution services; responsibility of performing Instrumentation & Control Engineering.
Reporting Lines and Interactions:
Hierarchically reports to: Department Manager
Operationally reports to: Project Discipline Lead Engineer
Key interactions: Project Engineer, Discipline Lead Engineer, Discipline Engineer, possibly client
Requirements:
• Bachelor s Degree or higher in Industrial, Instruments / Electronic Engineering or equivalent
• One (1) to four (4) years experience in instrument engineering design in the Oil & Gas, Refineries, Petrochemical, Chemical and related industries
• Self motivated, good attitude and willing to take responsibility
• Conversant with International Codes and Standards and Engineering Practices used in the industry – API, ASME & ISA etc.
• Good engineering knowledge of DCS, ESD, process Instrumentation, custody metering analyzer and functional safety in process plants.
• Experience with Intools/ Smart Plant Instrument is an advantage.
Main Accountabilities:
Main scopes of engineering deliverables performed include:
• Perform technical tasks assigned by Lead/Senior engineer on feasibility, conceptual, basic engineering, FEED, detailed design and EPC/ EPCM projects
• Ensure the technical quality and accuracy of the work produced and the assigned tasks are completed on time
• Liaise with other departments, clients, vendors, subcontractors and third parties as per Lead Engineer s instruction
• Participate in inter-disciplines, project, client and vendor meetings when requested by the Lead Engineer
• Prepare data sheets, specifications & requisition for all field Instrumentation, Control valves, Analyzers, On-off valves, Safety relief valves, DCS, ESD and FGS system and perform vendor offer review & technical bid evaluation, carryout vendor drawings/documents review and vendor data incorporation for the above instrument
• Perform calculations for control valves, safety relieve valves, flow elements, restriction orifice; thermowell wake frequency and selection of the suitable valve
• Perform Smart Plant Instrumentation software for Instrumentation
Pipeline Engineer
• Shall have a minimum of 4 years experience and above as Pipeline Engineering in Oil and gas Industry for Offshore and Onshore projects
• Shall have a n Engineering Degree (or recognized equivalent)
• Should be familiar with International Codes and Standards and common industry practices for design of subsea pipelines, risers and associated facilities
• Should have working experience in various pipeline engineering design activities, including:
• Pipeline and riser mechanical design such as thickness, stability, expansion, spanning, collapse, etc
• Pipeline, riser and spool stress analysis
• Have a working knowledge of offshore construction and equipment
• Shall have experience in preparation of MTO s, Cost Estimates, schedules, material and equipment specifications and data sheets
• Shall be Computer literate, i.e. shall be able to work on MS Office or equivalent. Experience in the use of AutoPIPE software is preferred. Experience in the use of industry standard software packages would also be an advantage
• Shall possess good communication skills in English language. Previous experience as a Team Leader and Good Team Player, and the ability to work with minimum supervision would be an added advantange
Piping Engineer
Job Requirements:
• Should possess a degree in preferably, Mechanical engineering
• Should have minimum 4 years experience and above as Piping Engineering in stress analysis of piping for offshore wellhead and compression platform or onshore oil/gas processing platform in an engineering organization using Caesar II software
• Must have experience in analyzing piping connected to static vessels, exchangers, pumps, compressors, Fin fan coolers etc., and preparation of datasheets for spring supports
• Experience in preparation of piping and valve material specification, piping specialty items datasheets would be an added advantage
• Should be computer literate, i.e. familiar with MS Office or equivalent. Experiences in 3D software (PDS or PDMS) would be an added advantage
• Should possess good communication skills in English language
• Should be willing to be based in Jakarta or Balikpapan
• Should be able to work effectively in a team and maintain good quality of work
Electrical Engineer
• Should have an Engineering degree from a recognized university
• Should have at least 4 years experience and above as Electrical Engineer in an engineering organization of oil and gas industry for Offshore and Onshore projects and/or petrochemical/power plant projects. Minimum 10 years experience can be considered for Senior Electrical Engineer position
• Should be conversant with electrical engineering analysis software such as ETAP / EDSA for conducting and concluding the various studies (covering Load Flow, Short Circuit, Transient Stability, Motor Starting, Relay Coordination, Harmonic Analysis studies). Having exposure to working in 3D projects utilizing PDS / PDMS would be an added advantage
• Should be familiar with International Codes and Standards (NEC, ANSI, IEC, NEMA, etc.)
• Should have working experiences in various electrical design activities, including but not limited to:
• Calculations (such as Lighting, Earthing and Cable Sizing)
• Electrical layout preparation (such as Cable and Cable Tray Layouts, Lighting Layouts, including Layouts etc.)
• Electrical Bulk Material Take Off (MTOs) and familiar with electrical equipment selection for hazardous area environments (both NEC and IEC)
• Should have knowledge in computer literate, i.e. MS Office or equivalent. Having experiences on 2D CAD tools such as AutoCAD and/or Microstation, 3D modeling tools (PDS or PDMS) exposure would be preferable and an added advantage
• Should possess good communication skills in English language
• Should hold Indonesia citizenships and ready to be placed in Jakarta
• Should be able to work effectively in team, maintain good quality of work, and possess good analytical skills in problem solving
For interested applicants, please submit your detailed resume and recent photograph by log on to:
www.technip.com
http://www.technip.com/en/careers/available-positions/locations
or via e-mail to:
hrd.indo@technip.com

Kamis, Juli 25, 2013




PT Technip Indonesia
TECHNIP is a public listed company in France with over 50 years of worldwide experience and more than 28 years of engagement in the Asia Pacific region.
With a global workforce of 23,000 people in 48 countries, industrial assets in 5 continents and a fleet of 19 vessels (by end 2011), Technip is a world leader in the fields of project management, engineering and construction for the oil & gas industry, offering a comprehensive portfolio of innovative solutions and technologies. Technip is a key contributor to the development of sustainable solutions for the energy challenges of the 21st century.
Technip established a subsidiary in Indonesia: PT. Technip Indonesia (PTTI), which services the Indonesian Oil and Gas, Petrochemical and General Industrial sectors. PTTI covers offshore and onshore field development, gas processing and liquefaction, refining and onshore pipelines. In non-oil sectors, PTTI covers fertilizers, chemicals, cement, life sciences, power generation and other growth market industries.
As part of our business expansion in Indonesia, we are seeking highly qualified professionals who are seeking career development to fill in position below:

Electrical Engineer
(Ref. 06203)
(DKI Jakarta)

Requirements:
• Must possess minimum Bachelor degree in Electrical Engineering from a recognized, fully accredited university in Indonesia.
• Minimum 3 to 6 years of experience in engineering field in oil and gas (both Onshore and Offshore) or petrochemical/power plant.
• Familiar with NEC,IEC,API,IEEE and others electrical standards/codes.
• Able to run electrical system electrical system study by using ETAP software is added value.
• Able to communicate in English both oral and written.

Main Accountabilities:
• Ensures timely approval of engineering and requisitioning documents from the client as well as timely technical and economical definition of change orders and claims.
• Prepares updates and checks calculations for detailed engineering.
• Contributes to optimization of material quantities by proposing value engineering solutions.
• Ensures contractual technical specifications are met by the suppliers- Adheres to the committed man/hours and budget.
• Ensures timely internal and external reporting on engineering / requisitioning activities to the group leader.
• Meets quality objectives of the project.
• Interfaces with other discipline specialist engineers and possibly project support functions such as procurement and planning.
• Provides guidance and mentoring to more junior engineering employees.

HVAC Engineer
(DKI Jakarta)

Requirements:
• Engineering degree with 10 years of experience design and execution of projects in on-shore and off-shore facilities.
• Be able to check and verify the work of junior engineers and provide guidance as required.
• Possess hands on experience in handling HVAC Software like HAP / Carrier E20 Program.
• Able to perform HVAC Calculations and develop HVAC drawings with precise knowledge.
• Familiar with international codes and standards applicable for HVAC in Oil and Gas Industry such as ASHRE, DW.143/144, SMACNA, SOLAS, and ABS.
• Have enough supervisory skill to manage a team of engineers and drafter.
• Should possess good communication skills in English language.

Instrument Engineer
(Ref. 06221)
(DKI Jakarta)

Job Summary:
Provide technical and project execution services; responsibility of performing Instrumentation & Control Engineering.

Reporting Lines and Interactions:
Hierarchically reports to: Department Manager
Operationally reports to: Project Discipline Lead Engineer
Key interactions: Project Engineer, Discipline Lead Engineer, Discipline Engineer, possibly client

Requirements:
• Bachelor s Degree or higher in Industrial, Instruments / Electronic Engineering or equivalent.
• One (1) to four (4) years experience in instrument engineering design in the Oil & Gas, Refineries, Petrochemical, Chemical and related industries.
• Self motivated, good attitude and willing to take responsibility.
• Conversant with International Codes and Standards and Engineering Practices used in the industry – API, ASME & ISA etc.
• Good engineering knowledge of DCS, ESD, process Instrumentation, custody metering analyzer and functional safety in process plants.
• Experience with Intools/ Smart Plant Instrument is an advantage.

Main Accountabilities:
Main scopes of engineering deliverables performed include:
• Perform technical tasks assigned by Lead/Senior engineer on feasibility, conceptual, basic engineering, FEED, detailed design and EPC/ EPCM projects.
• Ensure the technical quality and accuracy of the work produced and the assigned tasks are completed on time.
• Liaise with other departments, clients, vendors, subcontractors and third parties as per Lead Engineer s instruction.
• Participate in inter-disciplines, project, client and vendor meetings when requested by the Lead Engineer.
• Prepare data sheets, specifications & requisition for all field Instrumentation, Control valves, Analyzers, On-off valves, Safety relief valves, DCS, ESD and FGS system and perform vendor offer review & technical bid evaluation, carryout vendor drawings/documents review and vendor data incorporation for the above instrument.
• Perform calculations for control valves, safety relieve valves, flow elements, restriction orifice; thermowell wake frequency and selection of the suitable valve.
• Perform Smart Plant Instrumentation software for Instrumentation.

Mechanical Rotating Engineer
(DKI Jakarta)

Job Summary:
Perform Engineering design on current projects for onshore /offshore projects and to fulfill Departmental needs and support engineering operation within the Company.

Reporting Lines and Interactions:
Hierarchically reports to: Mechanical Department Head,
Operationally reports to: Lead Mechanical Engineer

Responsibilities:
Main scopes of engineering deliverables performed include:
• Basic engineering design and calculation reports.
• Equipment pre-selection reports (for Rotating Equipment).
• Technical Clarifications and Bid Evaluation Reports.
• Estimate equipment cost /Weight estimation.
• Interface with other disciplines.
• Vendor Data Review/Approval / Review Manufacturer Data Report (MDR).
• Inspection assistance (which will include own Technical Analyses of test results).
• Solve site related issues / Support to Site Technical Queries (STQ).

Requirements:
• The Candidate shall posses a recognised Degree in Mechanical Engineering with good communication skill.
• Possess at least minimum 5 years of design experience in various Rotating Equipment, including High Pressure Hydrocarbon Compressors and Turbo-Expanders (A minimum of 3 years of experience in EPC Contracting work will be an advantage, including adequate Site and Test-Witness experience).
• Be able to work independently and have the ability to Lead a team of Rotating Equipment and general Mechanical Engineers for oil & gas / petrochemical projects.
• Be able to produce Engineering specifications /Requisitions/ perform Equipment selection for Client approval in fast-track environments and conduct technical clarification meetings with potential Bidders /Clients.
• Be thorough with the standards and good engineering practices of international oil companies, in addition to international codes such as API, ASME/ANSI, NFPA, NACE, EN and ISO.
• He must possess detailed knowledge of his field and able to perform technical audit / Pre-qualification meeting at Vendor s premises.
• The Candidate having relevant experience 3 years and above can also apply.

Mechanical Static Engineer
(DKI Jakarta)

Job Summary:
Perform Engineering design on current projects for onshore /offshore projects and to fulfill Departmental needs and support engineering operation within the Company.

Reporting Lines and Interactions:
Hierarchically reports to: Mechanical Department Head,
Operationally reports to: Lead Mechanical Engineer

Responsibilities:
Main scopes of engineering deliverables performed include:
• Basic engineering design and calculation reports.
• Equipment pre-selection reports (for Static Equipment – Pressure vessels, column, reactors, storage tanks, air-coolers, TEMA exchangers, plate-exchangers, etc).
• Technical Clarifications and Bid Evaluation Reports.
• Equipment Cost estimation /Weight estimation.
• Interface with other disciplines.
• Vendor Data Review/Approval / Review Manufacturer Data Report (MDR).
• Inspection assistance (which will include own Technical Analyses of test results).
• Ability to solve site related issues / Support to Site Technical Queries (STQ).

Requirements:
• The Candidate shall posses a recognised Degree in Mechanical with good communication skill.
• Possess at least minimum 5 years of design experience in various Static Equipment including Pressure Vessels, Air-coolers, Heat Exchangers, Fired-Heater, API-650 tanks for Onshore /Offshore application, (3 years experience in EPC Contracting work will be an advantage, including adequate Site and Test-Witness experience).
• Be able to work independently and have the ability to Lead a team of Static Equipment /Mechanical Engineers for oil & gas / petrochemical projects.
• Be able to produce Engineering specifications /Requisitions/ perform Equipment selection for Client approval in fast-track environments and conduct technical clarification meetings with potential Bidders /Clients.
• Be thorough with the standards and good engineering practices of international oil companies, in addition to international codes such as ASME/ANSI, PD 5500, API-650/620, NACE, EN and ISO.
• He must possess detailed knowledge of his field and able to perform technical audit / Pre-qualification meeting at Vendor s premises.
• The Candidate having relevant experience 3 years and above can also apply.

Process Engineer
(Ref. 03897)
(DKI Jakarta)

Requirements:
• Must possess minimum Bachelor degree in Chemical Engineering from a recognized, fully accredited university in Indonesia.
• Minimum of 3 – 5 years experience in Offshore / Onshore Oil and Gas Engineering, Design and Commissioning Support for Process Engineer.
• Shall be able to check and verify the work of junior engineers and provide guidance as required.
• Should possess hands on experience in handling Process Engineering software like HYSYS, PIPESIM etc.
• Should be able to perform process calculations and develop process drawings with precise knowledge.
• Should have analytical knowledge and report writing capabilities.
• Should be familiar with international codes and standards applicable for Process Engineering in Oil and Gas industry.
• Should have enough supervisory skill to manage a team of engineers and drafters.
• Should be able to co-ordinate with other disciplines and the client as an effective team worker.
• Be willing to travel and stationed at various operating centre on needs basis for short-term assignment.

Main Accountabilities:
Main scope of Engineering deliverables performed include:
• Basic engineering design and calculation reports.
• Technical Clarifications and Bid Evaluation Reports.
• Equipment Cost estimation /Weight estimation.
• Interface with other disciplines.
• Vendor Data Review/Approval / Review Manufacturer Data Report (MDR).
• Inspection assistance (which will include own Technical Analyses of test results).
• Ability to solve site related issues / Support to Site Technical Queries (STQ).

Senior Treasury
(DKI Jakarta)

Responsibilities:
• Prepare cash flow.
• Prepare bank transfer and update bank book.
• Maintain good relationship with bank officer for fx and deposit rate, hedging transactions, e-banking and BG facility.
• Understand banks reconciliation.
• Liaise with regional and head office for reporting.

Requirements:
• Min. Bachelor Degree from reputable university majoring in Finance / Accounting.
• Strong knowledge of Financial Management.
• Experience at least 3 years in similar position.
• Experience in processing Bank Guarantee and hedging contract.

For interested applicants, please submit your detailed resume and recent photograph by log on to: www.technip.com
http://www.technip.com/en/careers/available-positions/locations

or via e-mail to:

hrd.indo@technip.com
, , ,

Jumat, Oktober 12, 2012
Oil Gas Job Vacancy in the International Offshore Engineering & Oil & Gas Services Company, Currently we are strengthening our team and looking for bright, high achiever individuals, capable of providing a professional performance with self-integrity and good teamwork mindset to fulfil the vacancies of:

Sr. ELECTRICAL ENGINEER
Qualification & Experience:

  • Having min 5 year experience for following: Single line Diagram, Motor Schematic, Cable Schedule
  • Mechanical Vendor Drawing Review
  • Connection Drawing
  • Bachelor Degree in Electrical Engineering
  • Experience 8-10 years
  • Having Good English
  • Having PDMS experience/skill

Sr. PIPING ENGINEER
Qualification & Experience:
  • Bachelor Degree in Mechanical Engineering / Material Engineering
  • Having 8 – 10 years experience in related position
  • Having Good English
  • Having PDMS experience/skill
  • Piping and Support Arrangement
  • Plant Layout (GA/MA development)
  • Material Handling Study
  • Knowledge of Stress Analysis
  • Stress Analysis
  • Pipe Support Design and strength Calculation
  • Piping Material Selection
  • Software Requirements: Caesar II nad SACS

Sr. INSTRUMENT & CONTROL SYSTEM ENGINEER
Qualification & Experience:
  • Having experience 8-10 years
  • Having 5 years experience of followings: Understanding P&ID, -Cable Schedule, -Wiring Diagram
  • Connection Drawing
  • Bachelor Degree in Engineering Physics / Electronic Engineering
  • Having Good English
  • Having PDMS experience/skill

Sr. STRUCTURE ENGINEER
Qualification & Experience:
  • Experience 8 10 years
  • Having 7 years, and more experience of Topside Structure Engineering
  • 5 years and more experience of Global Analysis (Including Fatigue and Blast analysis) and Local Analysis
  • Familiar with Industrial Code, Rule and Regulations
  • SACS, FATRAN
  • Experienced as leader for engineers
  • Bachelor Degree in Civil / Structure Engineering
  • Having Good English
Having PDMS experience/skill

Jr. PIPING ENGINEER
Qualification & Experience:
  • Bachelor Degree in Mechanical Engineering / Material Engineering
  • Experience 4-5 years
  • Having good English
  • Having PDMS experience/skill
  • Piping and Support Arrangement
  • Plant Layout (GA/MA development)
  • Material Handling Study
  • Knowledge of Stress Analysis
  • Stress Analysis
  • Pipe Support Design and strength Calculation
  • Piping Material Selection
  • Software Requirements: Caesar II, SACS

Jr. ELECTRICAL ENGINEER
Qualification & Experience:
  • Experience 4-5 years
  • Having PDMS experience/skill
  • Having 3 years experience for following:  Light Arrangement, Cable Tray Arrangement, Electrical Room Arrangement
  • Manufacturing Drawing Bachelor Degree in Electrical Engineering
  • Having Good English

Jr. Instrument & Control System Engineer
Qualification & Experience:
Experience 4-5 years
  • Having 3 years experience of followings: F&G Arrangement, -Plot Plan, Cable Tray Arrangement, Manufacturing Drawing
  • Bachelor Degree in Engineering Physics / Electronic Engineering
  • Having Good English
  • Having PDMS experience/skill


Jr. STRUCTURE ENGINEER
Qualification & Experience:
  • Experience 4-5 years
  • 3 years, and more experience of Topside Structure Engineering
  • 3 years and more experience of Global Analysis(Including Fatigue and Blast analysis) and Local Analysis
  • Familiar with Industrial Code, Rule and Regulations
  • SACS, FATRAN
  • 3 years and more experience of Preparation of Structure Drawing including experience of structure member arrangement and experience of member selection
  • Bachelor Degree in Civil / Structure Engineering
  • Having Good English
  • Having PDMS experience/skill

SUBSEA ENGINEER
Qualification & Experience:
  • Having more than 8 years experience in Offshore Structure as Subsea Engineer
  • Bachelor Degree in Mechanical Engineering / Ocean Engineering / Civil Engineering / Naval Architecture
  • Having Good English

Asphalt Plant Manager
Qualification & Experience:
  • Having more than 4 years experience as Asphalt Plant Manager
  • Bachelor Degree in Civil / Structure Engineering
  • Having Good English

If you think you are the right candidate to join our team, please send your complete CV with recent photograph and application letter to :  application@trilink-indonesia.com , Please put the position as your email subject. File in Ms Word Format . Oil Gas Jobs in International Offshore Engineering Company deadline 25 October 2012.

Jumat, Januari 11, 2013
Oil Gas Job Vacancy PT Technip Indonesia company in the services the Indonesian Oil and Gas, Petrochemical and General Industrial sectors. PTTI covers offshore and onshore field development, gas processing and liquefaction, refining and onshore pipelines. Currently we are looking for a bright, high achiever individual, capable of providing a professional performance with self integrity and good teamwork mindset to fulfill the vacancies of :

PROCESS ENGINEER - (DKI Jakarta)
Qualification & Experience:

  • Has 3 – 5 years experience in Offshore / Onshore Oil and Gas Engineering, Design and Commissioning Support for Process Engineer
  • Must possess minimum Bachelor degree in Chemical Engineering from a recognized, fully accredited university in Indonesia
  • Shall be able to check and verify the work of junior engineers and provide guidance as required
  • Should possess hands on experience in handling Process Engineering software like HYSYS, PIPESIM etc.
  • Should be able to perform process calculations and develop process drawings with precise knowledge
  • Should have analytical knowledge and report writing capabilities
  • Should be familiar with international codes and standards applicable for Process Engineering in Oil and Gas industry
  • Should have enough supervisory skill to manage a team of engineers and drafters
  • Should be able to co-ordinate with other disciplines and the client as an effective team worker
  • Be willing to travel and stationed at various operating centre on needs basis for short-term assignment

PROCESS SAFETY ENGINEER - (DKI Jakarta)
Qualification & Experience:
  • Minimum of 3 years experience in Offshore / Onshore Oil and Gas Engineering / Operation, Design and Commissioning Support
  • Should possess hands on experience in handling Process Engineering softwares like PIPENET, FLARESIM, etc.
  • Should be able to perform fire water hydraulic calculations and develop process safety drawings like hazardous area classification with precise knowledge
  • Min. Bachelor Degree from reputable university majoring in Chemical Engineering
  • Should have analytical knowledge and report writing capabilities
  • Should be familiar with international codes and standards applicable for Process Safety Engineering (NFPA, SOLAS, API, IP, etc.) in Oil and Gas industry
  • Should have enough supervisory skill to manage a team of drafters
  • Should be able to coordinate within the discipline and other disciplines
  • Should be a fast learner and a team worker

MECHANICAL ROTATING ENGINEER - (DKI Jakarta)
Qualification & Experience:
  • Having 5 years of design experience in various Rotating Equipment, including High Pressure Hydrocarbon Compressors and Turbo-Expanders (A minimum of 3 years of experience in EPC Contracting work will be an advantage, including adequate Site and Test-Witness experience)
  • The Candidate shall posses a recognised Degree in Mechanical Engineering with good communication skill
  • Be able to work independently and have the ability to Lead a team of Rotating Equipment and general Mechanical Engineers for oil & gas / petrochemical projects
  • Be able to produce Engineering specifications /Requisitions/ perform Equipment selection for Client approval in fast-track environments and conduct technical clarification meetings with potential Bidders /Clients
  • Be thorough with the standards and good engineering practices of international oil companies, in addition to international codes such as API, ASME/ANSI , NFPA, NACE, EN and ISO
  • He must possess detailed knowledge of his field and able to perform technical audit / Pre-qualification meeting at Vendor s premises
  • The Candidate having relevant experience 3 years and above can also apply

MECHANICAL STATIC ENGINEER - (DKI Jakarta)
Qualification & Experience:
  • Has 5 years of design experience in various Static Equipment including Pressure Vessels, Air-coolers, Heat Exchangers, Fired-Heater, API-650 tanks for Onshore /Offshore application, (3 years experience in EPC Contracting work will be an advantage, including adequate Site and Test-Witness experience)
  • Be able to work independently and have the ability to Lead a team of Static Equipment /Mechanical Engineers for oil & gas / petrochemical projects
  • The Candidate shall posses a recognised Degree in Mechanical with good communication skill
  • Be able to produce Engineering specifications /Requisitions/ perform Equipment selection for Client approval in fast-track environments and conduct technical clarification meetings with potential Bidders /Clients
  • Be thorough with the standards and good engineering practices of international oil companies, in addition to international codes such as ASME/ANSI, PD 5500, API-650/620, NACE, EN and ISO
  • He must possess detailed knowledge of his field and able to perform technical audit / Pre-qualification meeting at Vendor s premises
  • The Candidate having relevant experience 3 years and above can also apply

STRUCTURAL ENGINEER - (DKI Jakarta)
Qualification & Experience:
  • Possess recognized degree in Civil or Ocean Engineering
  • 3 – 5 years experience and above as Senior Structural Engineer in Structural analysis and design in Oil and Gas industry for offshore platforms
  • Experienced using SACS software for design of offshore structures
  • Should possess good communication skills in English language
  • Should hold Indonesian citizenship and ready to be placed in Jakarta or Balikpapan

INSTRUMENT ENGINEER
Qualification & Experience:
  • Bachelor s Degree or higher in Industrial, Instruments / Electronic Engineering or equivalent
  • One (1) to four (4) years experience in instrument engineering design in the Oil & Gas, Refineries, Petrochemical, Chemical and related industries
  • Self motivated, good attitude and willing to take responsibility
  • Conversant with International Codes and Standards and Engineering Practices used in the industry – API, ASME & ISA etc.
  • Good engineering knowledge of DCS, ESD, process Instrumentation, custody metering analyzer and functional safety in process plants.
  • Experience with Intools/ Smart Plant Instrument is an advantage.

PIPELINE ENGINEER
Qualification & Experience:
  • Shall have a minimum of 4 years experience and above as Pipeline Engineering in Oil and gas Industry for Offshore and Onshore projects
  • Shall have a n Engineering Degree (or recognized equivalent)
  • Should be familiar with International Codes and Standards and common industry practices for design of subsea pipelines, risers and associated facilities
  • Should have working experience in various pipeline engineering design activities, including:
  • Pipeline and riser mechanical design such as thickness, stability, expansion, spanning, collapse, etc
  • Pipeline, riser and spool stress analysis
  • Have a working knowledge of offshore construction and equipment
  • Shall have experience in preparation of MTO s, Cost Estimates, schedules, material and equipment specifications and data sheets
  • Shall be Computer literate, i.e. shall be able to work on MS Office or equivalent. Experience in the use of AutoPIPE software is preferred. Experience in the use of industry standard software packages would also be an advantage
  • Shall possess good communication skills in English language. Previous experience as a Team Leader and Good Team Player, and the ability to work with minimum supervision would be an added advantange

PIPING ENGINEER
Qualification & Experience:
  • Should possess a degree in preferably, Mechanical engineering
  • Should have minimum 4 years experience and above as Piping Engineering in stress analysis of piping for offshore wellhead and compression platform or onshore oil/gas processing platform in an engineering organization using Caesar II software
  • Must have experience in analyzing piping connected to static vessels, exchangers, pumps, compressors, Fin fan coolers etc., and preparation of datasheets for spring supports
  • Experience in preparation of piping and valve material specification, piping specialty items datasheets would be an added advantage
  • Should be computer literate, i.e. familiar with MS Office or equivalent. Experiences in 3D software (PDS or PDMS) would be an added advantage
  • Should possess good communication skills in English language
  • Should be willing to be based in Jakarta or Balikpapan
  • Should be able to work effectively in a team and maintain good quality of work

ELECTRICAL ENGINEER
Qualification & Experience:
  • Should have an Engineering degree from a recognized university
  • Should have at least 4 years experience and above as Electrical Engineer in an engineering organization of oil and gas industry for Offshore and Onshore projects and/or petrochemical/power plant projects. Minimum 10 years experience can be considered for Senior Electrical Engineer position
  • Should be conversant with electrical engineering analysis software such as ETAP / EDSA for conducting and concluding the various studies (covering Load Flow, Short Circuit, Transient Stability, Motor Starting, Relay Coordination, Harmonic Analysis studies). Having exposure to working in 3D projects utilizing PDS / PDMS would be an added advantage
  • Should be familiar with International Codes and Standards (NEC, ANSI, IEC, NEMA, etc.)
  • Should have working experiences in various electrical design activities, including but not limited to:
  • Calculations (such as Lighting, Earthing and Cable Sizing)
  • Electrical layout preparation (such as Cable and Cable Tray Layouts, Lighting Layouts, including Layouts etc.)
  • Electrical Bulk Material Take Off (MTOs) and familiar with electrical equipment selection for hazardous area environments (both NEC and IEC)
  • Should have knowledge in computer literate, i.e. MS Office or equivalent. Having experiences on 2D CAD tools such as AutoCAD and/or Microstation, 3D modeling tools (PDS or PDMS) exposure would be preferable and an added advantage
  • Should possess good communication skills in English language
  • Should hold Indonesia citizenships and ready to be placed in Jakarta
  • Should be able to work effectively in team, maintain good quality of work, and possess good analytical skills in problem solving

If you think that you are really the right person to fill this challenging position, please send your application, CV and recent photograph to: hrd.indo@technip.com  or http://www.technip.com/en/careers/available-positions/locations  , website : www.technip.com  . Oil Gas Job Vacancy PT Technip Indonesia deadline 23 January 2013.
, , , , , , , , , ,

Senin, Oktober 07, 2013
Lowongan Kerja Sidoarjo Oktober 2013 PT Alim Ampuhjaya Steel - Our company was established in 1980. We are in the business of manufacturing Spiral Pipe, Welded Beam, and Steel Fabrication. We are a leading steel company in Sidoarjo East Java region. Have a reliable staff in each department so that we believe can compete with other steel companies. Now we are in more developed stage and we need young workers to join with us in a variety of positions:

Marketing Engineer 
Requirement :
  1. Candidate must possess at least a Diploma, Bachelors Degree, Engineering (Civil), Engineering (Industrial), Engineering (Mechanical), Engineering (Others), Marketing or equivalent.
  2. Female, age maximum 38
  3. Having good communication
  4. Characteristics: trustworthy, willingness to learn, loyal, good interpersonal skills, motivated
  5. Able to work under pressure
  6. Able to work in a team or individual
  7. At least 1 year(s) of working experience in the related field is required for this position.
  8. Applicants must be willing to work in Sidoarjo.
  9. Preferably Staff (non-management & non-supervisor)s specializing in Marketing/Business Development or equivalent.
  10. Full-Time position(s) available.

Surveyor 
Requirement :
  1. Candidate must possess at least a Bachelors Degree, Engineering (Civil) or equivalent.
  2. Land area measuring
  3. Can Wearing Theodolite, Total Station Digital, etc.
  4. Experience in construction projects, buildings, and bridges
  5. Able to work under pressure
  6. Able to work in a team or individual

Management Trainee 
Requirement :
  1. Candidate must possess at least a Diploma, Bachelors Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Marine) or equivalent.
  2. At least 1 year(s) of working experience in the related field is required for this position.
  3. Applicants must be willing to work in Sidoarjo.
  4. Preferably Staff (non-management & non-supervisor)s specializing in Engineering - Others or equivalent.
  5. Full-Time position(s) available.

Quality Control 
Requirement :
  1. Candidate must possess at least a SMU, Diploma, Bachelors Degree, Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Material Science), Engineering (Metal Fabrication/Tool & Die/Welding), Engineering (Others) or equivalent.
  2. At least 2 year(s) of working experience in the related field is required for this position.
  3. Have a certified UT / MT / PT / WI
  4. Applicants must be willing to work in Sidoarjo.
  5. Preferably Staff (non-management & non-supervisor)s specializing in Engineering - Civil/Construction/Structural or equivalent.

Accounting Staff 
Requirement :
  1. Candidate must possess at least a Bachelors Degree, Economics, Finance/Accountancy/Banking, Business Studies/Administration/Management or equivalent.
  2. Female max. age 35
  3. Required skill(s): tax computations, Accounting Audit, SAP.
  4. At least 1 year(s) of working experience in the related field is required for this position.
  5. Applicants must be willing to work in Sidoarjo.
  6. Preferably Staff (non-management & non-supervisor)s specializing in Finance - Audit/Taxation or equivalent.
  7. Full-Time position(s) available.

Welding Inspector 
Requirement :
  1. Must have Bachelors Degree or Diploma, in Engineering (Marine or Mechanical) or equivalent.
  2. Male Max. Age 35
  3. Minimum 3 years of working experience in Steel Industry.
  4. Must be AWS-CWI or CSWIP 3.0/3.1 Certified Wilding Inspector
  5. Knowledge of NDT and able to inspect Radiography film
  6. Able to read and write in English Language
  7. At least 2 year(s) of working experience in the related field is required for this position.
  8. Applicants must be willing to work in Sidoarjo.
  9. Preferably Staff (non-management & non-supervisor)s specializing in Engineering - Civil/Construction/Structural or equivalent.
  10. Full-Time position(s) available.

Cost Control 
Requirement :
  1. Bachelors Degree or Diploma D3/S1 Civil Engineering
  2. Female Max. age 35
  3. Understand the structure of steel (preferably)
  4. Able to read the image (at least to Auto Cad)
  5. Had the experience of estimates (making RAB)

Structure Designer 
Requirement :
  1. Candidate must possess at least a Diploma, Bachelors Degree, Engineering (Civil) or equivalent.
  2. Required skill(s): autocad 2d 3d, staad pro, SAP.
  3. At least 1 year(s) of working experience in the related field is required for this position.
  4. Applicants must be willing to work in Sidoarjo.
  5. Preferably Staff (non-management & non-supervisor)s specializing in Engineering - Civil/Construction/Structural or equivalent.
Sponsor/Ads

If you are interested in applying for this job, please send your CV, recent photo, copy of ID card, health certificate, copy of last diploma and academic transcript to the address (28 Oktober 2013): 

Attn: Human Resources Department
Jl. Letjen. Sutoyo No. 241, Medaeng , Waru - Sidoarjo
.
Langganan: Postingan (Atom)
Diberdayakan oleh Blogger.