Lowongan Kerja ConocoPhillips, Berkantor pusat di Houston, Texas, ConocoPhillips memiliki operasi dan kegiatan di 30 negara, $ 58 milyar pada pendapatan tahunan, $ 117.000.000.000 aset, dan sekitar 16.900 karyawan per 31 Desember 2012. Produksi dari operasi yang dilanjutkan rata-rata 1.527 MBOED pada tahun 2012, dan cadangan terbukti awal adalah 8,6 miliar BOE pada 31 Desember 2012.
Di Indonesia, ConocoPhillips telah beroperasi selama lebih dari 40 tahun dan terus berkembang dan memainkan peran sebagai salah satu mitra terkemuka di Indonesia dalam memenuhi tuntutan peningkatan energi dengan mengeksplorasi cadangan baru serta memaksimalkan nilai wilayah inti yang ada.
ConocoPhillips melalui Lowongan Kerja 2013 sedang mencari individu yang bermotivasi tinggi, top-performing yang mencari kesempatan untuk mengembangkan, belajar dan tumbuh dengan perusahaan yang dinamis dan global sebagai:
Di Indonesia, ConocoPhillips telah beroperasi selama lebih dari 40 tahun dan terus berkembang dan memainkan peran sebagai salah satu mitra terkemuka di Indonesia dalam memenuhi tuntutan peningkatan energi dengan mengeksplorasi cadangan baru serta memaksimalkan nilai wilayah inti yang ada.
ConocoPhillips melalui Lowongan Kerja 2013 sedang mencari individu yang bermotivasi tinggi, top-performing yang mencari kesempatan untuk mengembangkan, belajar dan tumbuh dengan perusahaan yang dinamis dan global sebagai:
1. Pipeline & Asset Integrity Engineer Onshore
Job Number: 00L50
Work Location: Jakarta
Closed Date : November 12, 2013
ROLES & RESPONSIBILITY:
• Assist Operations on full life cycle asset integrity engineering of all plant fixed equipment. Apply long-term strategic engineering solutions to prevent corrosion and optimize production.
• Ensure the asset registry for all fixed equipment is maintained
• Communicate threats to asset integrity of fixed equipment to operations
• Implement/support risk based inspection programs to improve asset integrity
• Implement/support asset integrity condition management strategies and programs for loss containment purposes including corrosion management
• Carry out routine analysis of inspection and conditioning management programs, keeping record of asset deterioration patterns and behaviors
• Troubleshoot fixed equipment recurrent problems and apply root case analysis (RCA) practices to equipment failure investigations
• Maintain ownership of the Degradation Manuals and ensure they are up to date and accurately reflect any changes identified due to process changes, turnaround inspections or monitoring programs
• Support the asset integrity continuous improvement program incorporating strategies, polices, codes of practice, procedures, specifications and guidelines
REQUIRED QUALIFICATION:
Typically 5+ years of pressure equipment integrity/corrosion management engineering experience in a role supporting plant operations with an Engineering Degree (S1) or an Engineering Technical Diploma (D3)
Familiarity with and understanding of:
• Pressure equipment integrity/corrosion management
• Pipeline integrity/corrosion management
• Supporting plant operations
• Corrosion and degradation prevention strategies
• Metallurgy, materials, welding and quality assurance
• Pressure Equipment Integrity programs and International standards (ASME)
• Inspection Test Plans and/or risk-based inspections
2. Performance Monitoring System Engineer
Job Number: 00JO8
Work Location: Jakarta
Closed Date : November 21, 2013
Responsibilities:
The Performance Monitoring System Engineer is responsible to provide robust performance monitoring system with data integrity, provide appropriate plots for troubleshooting, advice running strategy for optimum overhaul schedule for all ConocoPhillips Indonesia (COPI) major Turbomachinery.
Specific responsibilities may include:
• Data acquisition and integrity for performance monitoring system and condition monitoring system. Integration System & Solution analyst for any discrepancies of performance monitoring tools.• Managing software license applicable for performance monitoring, condition monitoring and troubleshooting tools.
• Monitoring and reporting performance and condition of Turbomachinery.
• Data presentation for performance analysis, condition analysis and troubleshooting.
• Planning & optimization of Turbomachinery inspection and overhaul. Advise running strategy Turbomachinery operation for optimum cost.
• Remote witness test for Turbomachinery performance and condition.
• Technical data and action register for Turbomachinery such as service bulletins and specification.
• Inspection and action register for Turbomachinery.
• External and internal reporting on Turbomachinery.
• Development of Turbomachinery collaboration center. Enhance with new technology such as Predictive Analytics.
• Supporting and complying with the policies, goals, efforts, processes and programs of COPI's Health, Safety and Environmental (HSE) Management System.
• Actively participating and representing COPI's interests in the Rotating Equipment Network of Excellence and seek opportunities to implement knowledge sharing by grab others’ and share our practices.
• Liaising with other Departments and vendors related with Turbomachinery collaboration center.
Basic Qualifications:
• Hold bachelor degree (S1) in Information Technology, Mechanical or Engineering of Physics.• Minimum 2.5 years of Performance Monitor Analyst working experience
• Minimum 3 years of oil and gas field or industrial experience
Preferred Qualifications:
• Understand Performance Monitoring System.• Basic knowledge of Turbomachinery system
• Able to read engineering drawing and document, especially P&ID, Logic Diagram, Maintenance Manual, Spare Part List and Equipment Datasheet
• Had exposure to Project Management
• Had exposure to as IT Application Analyst.
• Had experience in data acquisition process
• Strong computer skills (Microsoft products: Word; Excel; Project; PowerPoint; Access; Visio)
• Had experience in using and developing new IT application
• Strong knowledge and creativity in the use of data analysis and interpretation tools
• Strong planning and time management skills
• Superior written and oral communication skills
• The ability to work effectively in a team environment
• Respect of peers and others across the business organization
3. Senior Process Engineer
Job Number: 00L9C
Work Location: Jakarta
Closed Date : November 18, 2013
Description:
The main purpose of this role is to provide process engineering technical expertise and services focused on technical support and explore improvement opportunities, troubleshooting and optimization of facilities operations. In addition, provide further feasibility assessment / study up to decision on selected option. The other role is to demonstrate and champion the knowledge sharing activities and engage with network of excellence within ConocoPhillips.
Responsibilities:
• Champion in optimization of oil and gas production
• Evaluate Process, Equipment, and simulation modelling sizing against the actual for optimization purpose.
• Assist Operation and Project Departments for developing operating procedure, as well as commissioning and start up procedure for production facilities.
• Prepare all aspect of process design requirements including the compilation of scopes of work and specifications for conceptual and FEL development.• Ensure the contractor's technical work scopes are executed in accordance with Contract specifications, contract technical requirements and Industry codes & standards.
Additional Information:
This person will be the senior process person in the team, with the ability to work independently as well as guiding other process engineers. Shall continuously demonstrate leadership competency while holding this role and responsibilities.
Basic/Required Qualifications:
• BSc degree (S2) in Chemical Engineering
• Having more than 7 years working experience in process engineering design, operation and optimization in the oil & gas industry
Preferred Qualifications:
• Proven technical competence in onshore and offshore facilities
• Deep understanding of process engineering science, technology and practice (amine absorption, dehydration, mercury removal, distillation, refrigeration)
• Strong technical engineering skills with a working knowledge of applicable Codes, Standards and Business Unit Specification
• Process Software Application
• Hysys / UniSim / ProMax (steady state & dynamics)
• Flaresim / Flarenet
• HTRI / HTFS or equivalent
• Pipesim or equivalent
• Preferred transient flow assurance software : Olga, LedaFlow
• Working Knowledge of Process Engineering work which included:
Basic Theory / Principle
Process Control
Project Process Engineering / Design
Gas & Oil Handling / Processing
Heat Transfer & Rotating Equipment
Utility System
Vessel analytical
Engineering Drawings and Documentation
Exploration and Production – General
4. Senior Performance Monitoring & Optimization Engineer
Job Number: 00KU6
Work Location: Jakarta
Closed Date : November 21, 2013
BASIC PURPOSE:
• To ensure COPI compression and power generation units are operated at optimum condition by providing guidance and direction to Rotating Equipment Supervisor, Maintenance and Operation personnel.
• To monitor performance of COPI compression and power generation units.
• To minimize unscheduled shutdown of compression and power generation units by doing immediate troubleshooting support utilizing various diagnostic tools
• To provide guidance, recommendation or instruction to Offshore/ Onshore Service Engineer.
• To analyze/ interpret and report performance of compressor, gas turbine and major/ critical rotating equipment and capable to rate the performance.
• To review boroscope inspection on gas turbine reported by Offshore/ Onshore Service Engineers.
• To review shop performance test report or witness shop performance test for compressor and gas turbine and adjust the performance monitoring system accordingly.
• To identify areas of opportunity to optimize process system for production gain.
NATURE AND SCOPE:
• Advise Onshore and Offshore Operation and Maintenance personnel in optimizing operation, improving performance and troubleshooting of compression and power generation units.• The role of the position is to support Maintenance Excellence team in providing condition assessment of major/ critical rotating equipment.
• The role requires technical proficiency, analysis skill, certification, and experience in troubleshooting and communications skills with onshore and offshore operation personnel.
• This is Jakarta-based job.
PRINCIPAL ACCOUNTABILITY:
• Intensive communication is a must with onshore and offshore Operation and Maintenance personnel. • Weekly Turbomachinery performance reporting to Maintenance - Operation Service Coordinator, Reliability Engineer and Rotatining Equipment Engineer on onshore and offhore compression and power generation performance and opprtunitiy for optimization.• Data review on performance of compression and power generation units.
• Site investigation on abnormal performance data and provide failure prevention in advance.
REQUIRED QUALIFICATION:
• Hold bachelor degree (S1) in Mechanical or Process Engineering
• At least 5 years experience in maintenance and operation of Turbomachinery.
• Familiar with oil and gas process operation and maintenance
• Have extensive troubleshooting experience and sense of urgency.
• Thermodynamic and Turbomachinery performance
• Gas turbine and compressor anatomy
• Monitoring and machinery analysis
• Troubleshooting and analysis thinking
• Data acquisition and processing
• Communication
• Strong computer skills (Microsoft products: Word; Excel; Project; PowerPoint; Access; Visio)
• Strong planning and time management skills
• Superior written and oral communication skills
• The ability to work effectively in a team environment
• Respect of peers and others across the business organization
Additional Information:
This person will be the senior process person in the team, with the ability to work independently as well as guiding other process engineers. Shall continuously demonstrate leadership competency while holding this role and responsibilities.
Basic/Required Qualifications:
• BSc degree (S2) in Chemical Engineering
• Having more than 7 years working experience in process engineering design, operation and optimization in the oil & gas industry
Preferred Qualifications:
• Proven technical competence in onshore and offshore facilities
• Deep understanding of process engineering science, technology and practice (amine absorption, dehydration, mercury removal, distillation, refrigeration)
• Strong technical engineering skills with a working knowledge of applicable Codes, Standards and Business Unit Specification
• Process Software Application
• Hysys / UniSim / ProMax (steady state & dynamics)
• Flaresim / Flarenet
• HTRI / HTFS or equivalent
• Pipesim or equivalent
• Preferred transient flow assurance software : Olga, LedaFlow
• Working Knowledge of Process Engineering work which included:
Basic Theory / Principle
Process Control
Project Process Engineering / Design
Gas & Oil Handling / Processing
Heat Transfer & Rotating Equipment
Utility System
Vessel analytical
Engineering Drawings and Documentation
Exploration and Production – General
4. Senior Performance Monitoring & Optimization Engineer
Job Number: 00KU6
Work Location: Jakarta
Closed Date : November 21, 2013
BASIC PURPOSE:
• To ensure COPI compression and power generation units are operated at optimum condition by providing guidance and direction to Rotating Equipment Supervisor, Maintenance and Operation personnel.
• To monitor performance of COPI compression and power generation units.
• To minimize unscheduled shutdown of compression and power generation units by doing immediate troubleshooting support utilizing various diagnostic tools
• To provide guidance, recommendation or instruction to Offshore/ Onshore Service Engineer.
• To analyze/ interpret and report performance of compressor, gas turbine and major/ critical rotating equipment and capable to rate the performance.
• To review boroscope inspection on gas turbine reported by Offshore/ Onshore Service Engineers.
• To review shop performance test report or witness shop performance test for compressor and gas turbine and adjust the performance monitoring system accordingly.
• To identify areas of opportunity to optimize process system for production gain.
NATURE AND SCOPE:
• Advise Onshore and Offshore Operation and Maintenance personnel in optimizing operation, improving performance and troubleshooting of compression and power generation units.• The role of the position is to support Maintenance Excellence team in providing condition assessment of major/ critical rotating equipment.
• The role requires technical proficiency, analysis skill, certification, and experience in troubleshooting and communications skills with onshore and offshore operation personnel.
• This is Jakarta-based job.
PRINCIPAL ACCOUNTABILITY:
• Intensive communication is a must with onshore and offshore Operation and Maintenance personnel. • Weekly Turbomachinery performance reporting to Maintenance - Operation Service Coordinator, Reliability Engineer and Rotatining Equipment Engineer on onshore and offhore compression and power generation performance and opprtunitiy for optimization.• Data review on performance of compression and power generation units.
• Site investigation on abnormal performance data and provide failure prevention in advance.
REQUIRED QUALIFICATION:
• Hold bachelor degree (S1) in Mechanical or Process Engineering
• At least 5 years experience in maintenance and operation of Turbomachinery.
• Familiar with oil and gas process operation and maintenance
• Have extensive troubleshooting experience and sense of urgency.
• Thermodynamic and Turbomachinery performance
• Gas turbine and compressor anatomy
• Monitoring and machinery analysis
• Troubleshooting and analysis thinking
• Data acquisition and processing
• Communication
• Strong computer skills (Microsoft products: Word; Excel; Project; PowerPoint; Access; Visio)
• Strong planning and time management skills
• Superior written and oral communication skills
• The ability to work effectively in a team environment
• Respect of peers and others across the business organization
Lowongan Kerja Terbaru November ConocoPhillips 2013
ConocoPhillips
Apply Online (Posisi 1)
Apply Online (Posisi 2)
Apply Online (Posisi 3)
Apply Online (Posisi 4)
Posting Komentar